Tag: codemeter

  • No valid licenses found

    If you’re trying to launch Muk3D and get an error message that there are no available licenses, this could be due to several reasons.  The message you’ll see is shown below. You may also see a license selector, but all licenses are dark red.  (If you only have a single configuration type, you may not…

  • Verifying network license connectivity

    If you’re having trouble connecting to a network license, the first thing to do is connect that the license server is running and reachable from your computer.  This can be done by connecting to CodeMeter WebAdmin on the server and verifying that its operational.  (You’ll need the server name or IP address to do this).…

  • Setting up network license server

    Download the latest version of the CodeMeter User Runtime from Wibu Systems.  Muk3D and Catapult do not need to be installed on the server. Network licensing on end user computer If you’re using Muk3D with a network license, Catapult only needs to be installed on end user computers. The Catapult licensing file is also only…

  • Setting up end user to access network license

    you’re using Muk3D with a network license, Catapult only needs to be installed on end user computers. The Catapult licensing file is also only needed for end users. For new user installations that use a network license, the following needs to be done on the end user computer:

  • Requesting a temporary Muk3D license

    As of v2020.1 of Catapult, temporary licenses for Muk3D need to be requested through Catapult.  Once you’ve installed Catapult on your computer, you can request an evaluation (temporary) license by running Licensing/Request evaluation license. This will generate an email with your login name and PC name, and this can be sent to licensing@muk3d.com. Once this…

  • Removing CodeMeter licenses from a server

    This article explains the steps that need to be taken to remove a CodeMeter license from a network server. First, get the license number by opening CodeMeter Control Center (either from the Start menu, or the tool tray). Select the Muk3D Formation license and note the serial number. Run Start/CodeMeter/CmDust to generate a log file…

  • Removing an evaluation license

    If an expired evaluation license is on your system (either from evaluation or training), it can cause problems with Muk3D.  Catapult will keep flashing warning messages that the licenses aren’t valid and eventually it will shut Muk3D down. There are three ways to remove a license. Through Catapult Run the command Licensing/Remove evaluation license.  This…

  • Removing a Formation license

    This article explains the steps that need to be taken to remove a Formation license from a computer. First, get the license number by opening CodeMeter Control Center (either from the Start menu, or the tool tray). Select the Muk3D Formation license and note the serial number. Now open CodeMeter Command Prompt (from Start Menu)…

  • Installing a network license update

    If you’ve had to update network license and have received a license update file (*.WibuCmRaU) please follow these steps to apply the update and verify that it was installed correctly. This operation can be undertaken while users are connected to the server without any impact to connected users.  The only instance where this may cause…

  • Installing a Formation license

    This article goes through the process of setting up a Muk3D Formation license. Install the license container You will have either been sent a license container (Muk3D-Formation.wbb) or it can be downloaded from the bottom of this page. To install it in CodeMeter, either drag and drop onto the CodeMeter Control Center or run File/Import…